3D Printer Enclosure with Ventilation Kit, LED Light,Thermo-Hygrometer, Premium Fireproof Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3 V3 SE/KE/Ender 3/3 Pro/3V2/3S1/Neo

I initially bought this to help vent fumes from more toxic prints (ABS, ASA) but I actually just keep it on all the time now so I don't have to smell the PLA or PETG either. And even though the latter two are non-toxic, I figure it's probably not a great idea to sniff them all day long. lol. This works great. Fit my Bambu A1, Creality Hi perfectly.I even squeezed a QIDI Plus 4 inside one, which I wasn't sure if it would work. I had to prop up the bottom ontop of a small sturdy concrete block, but it fits. The advantage here is even when the active chamber is running, you can run the soft enclosure's fan full blast and it will create a zone of negative pressure around the printer. The inside of the chamber stays perfectly at the temperature needed for ABS/ASA, but the fumes go outside and you don't smell a thing as long as you keep it zipped tight, with a small crack for the air intake.

This has been an absolute game changer for my 3-D printing! After simple assembly, which only took about 10 minutes, I was able to start printing in a contained environment. I live in an area where weather and humidity can fluctuate constantly. This enclosure does an amazing job of keeping the printing environment, consistent and the humidity and the low 20% range which is more than I could’ve hoped for. I wish I had found this years ago!

Really great idea. I am using this for a FlashForge 5M so this enclosure is entirely too big, but it leaves space for cables and a spool and other things. It is surprising how small of a box this thing comes in. It takes a bit of assembly, which isn't to bad. But the instructions could be better. For example, it comes with supports labeled 1, 2, and 3, and several connectors, but where do they go and in what order? Does the 3 attach to the 1, or do you attach two 3s together and then attach that to two 1s? If you are 3D printing, I am sure you can get this together, but the instructions are unnecessarily vague.Also the fan is very cheap/loud, and both the fan and light are USB powered and no power plug is included. It would have been nice to include a dual power adapter. And while the ventilation is great, there is no intake. And since it's so well sealed, there's very little space for air to enter. So I used the large velcro opening on the left, and attached a bug screen, so there is plenty of ventilation but nothing else can get thru.But once you figure these things out, it's actually quite a nice enclosure. Nice window, great zipper opening, versatile cable and air routing, useful temperature gauge, and plenty of room for plugs and cables and other tools. Yes, you could make something like this yourself, but for the price, you actually would spend more putting this together separately. So while it's not perfect, it's a great enclosure at a great price.

Even if it’s not listed the V3 plus fits snug, after the spool holder relocation it’s great, feels good quality and and looks sturdy enough. Haven’t tried the fan and LED but they’re basic items so not really relevant.

Work great with Elegoo Saturn 4 ultra and mars curing station!

I can confirm that this fits BambuLab P1S with AMS without issues. I recommend that you print out a poop chute so it's easy to clean up the plastic waste that comes out from the back. While I was initially worried about the structural integrity, I've had no issues with it. I've only used it with PLA, but I'm sensitive to even the smell of PLAs. It's been great at isolating the smell from my room.

When I opened the packaging, I noticed that it came with a pair of disposable gloves. I wasn't sure what they were for until I started handling the rods to put this thing together. Then, I realized that the rods are made of fiberglass! They don't mention it anywhere in the manual, but the gloves are there to protect you from getting fiberglass splinters. YOU MUST USE THE GLOVES WHEN ASSEMBLING THE FRAME. Anyone who has had fiberglass splinters will tell you how irritating they are and how difficult it is to get rid of them.Also, it could just be me, but the reflective finish might make it more difficult for the printer to connect to WiFi. It could just be my printer

I’ve had this product for a year now. I am pretty happy with the purchase. It removed the smell of the fumes within the household while printing. I have been able to print materials like ASA. The fan has been functioning until now with no issue. I ended up putting an adaptor for it to look sleek while connecting it to the window to expel the fumes outside. I was unable to find a use for the LED fixture.