Desertcart Logo

Q: For install 1 pair of speakers (8 ohm). On what position should be the little switch that is in front of the vol control. 8x, 4x, 2x and 1k?

For a single pair of 8 ohm speakers use the 1X setting. From the chart in the manual, this applies to amplifiers with both 4 and 8 ohm minimum load levels.

Q: When I have the volume turned down very low, I can hear distorted music/popping coming from this module inside of the wall. Is this normal?

Is the distortion/popping coming from the speakers and/or volume control in the wall? Not sure how you can hear sounds out of volume control. In any event, what you hear is not normal.

Q: How do I used the 1x,4x8x switch on the side of this thing? I am hooking up 5 pairs of 8ohm speakers to the receiver.

It depends on the minimum load impedance of your receiver, which should be listed in the owner's manual or on the rear panel of the receiver. If it is 4 ohms with 5 pairs of 8 ohm speakers the switch on each of the volume controls should be set to 4x. If the receiver is rated at 8 ohms minimum load the switch on each volume control should be at 8x. See page 7 of http://www.nilesaudio.com/images/PDF/VCS100_100R_manual.pdf. You will notice a decrease in volume level from the speakers compared to what you had with only one set of speakers. See page 3 of the manual.

Q: At church I have 2 front facing speakers + a monitor in back for choir. Monitor's wired to the left front speaker. Can this control the monitor vol?

Yes. It is essentially a 2 pole volume control. Know that it controls the volume delivered from the source. In my instance, I have the switch feeding a secondary pair of speakers from a A/B speaker output on a main amplifier. With the main volume up, I use the control to reduce the volume of the secondary speakers. It wont increase volume above the delivered signal, so there are occasions where the A speakers (inside)are too loud and the B speakers (patio) are too low...the solution is to wire the lower volume requirement to the control.

Deliver to Belarus

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Specifications

Is Electric	Yes
Power Source	Corded Electric
Number of Power Levels	12
Speaker Maximum Output Power	100 Watts
Subwoofer Connectivity Technology	Wired
Connectivity Protocol	RCA
Connectivity Technology	RCA
Number Of Circuits	1
Audio Driver Type	Dynamic Driver
Item Weight	1.9 Pounds
Item Dimensions D x W x H	2.03"D x 3.8"W x 8"H
Frequency Response	100
Compatible Devices	Laptop, Desktop, Television, Projector
MP3 player	No
Specific Uses For Product	indoor audio systems
Controller Type	Button
Color	Color
Is Waterproof	FALSE
Warranty Type	Limited
Control Method	Touch
Audio Output Mode	Stereo
Mounting Type	Wall Mount
Material Type	Plastic
Recommended Uses For Product	indoor audio systems, multi-room audio installations, connecting and controlling the volume of speakers in a home audio setup