Gas Can Spout Replacement, Anti-Spill Gas Can Nozzle Replacement, 2-Kit Upgraded Spouts No Leaky with Flexible Nozzle, Can Vent Caps, Fit for Most 1/2/5/10 Gal Can

These work well with the diesel cans I bought - the flexible hose specifically. The cans came with a hard unbendable spout which doens't work well at all so having these accessories I'm able to more easily use when pouring diesel into tractor/truck etc.

These worked perfectly and fit both my gas cans that did not have spouts like this. There seem to be a lot of parts, but that is to cover all the bases. The other set I bought would not fit, even though I measured the opening. These are perfect!

Good , just hoped the neck would have been a bit longer.

Looks like these will work just fine. Easy to install, variety of fittings even a drill bit to use if needed.

These work great on both types of gas can necks, plus add a vent for smoth pouring.

The plastic they use get's brittle, after a short amount of time.I Purchased the kit in August 2024. Worked great. Until today, Dec 24, 2024. I have a 5 gallon Plastic gas can that I use to fill other smaller gas cans with various oil mixtures. So I don't use it very often. Today, when I went to put gas into an ATV, I attempted to open the air-vent, that came with the kit and I installed on the gas can, but the lid broke off, leaving the end of the plastic insert, on the inside of the can. Attempts to pull it out caused it to fall inside the can into the gas. Now I have to empty the can, to get the little plastic piece out. The picture attached shows that the part that was on the outside of the can, with portion missing, inside the can. They need better plastic that doesn't become brittle, in this case, after about 5 months!

It's a lot better than the child proof ones witch is a pain to use. It's straight forward and eazy to convert over a must have

bought this kit to redo some gas cans in need of help. let me start with the drill bit that comes with the kit is too big of a bit the Hole it makes for the vent hole the vent cap fits way to lose it stays in place but is loose and you can pull it out with no problem. I ended up buying a package of vents that use a bigger that fit great. the kit comes with two styles of spout caps both caps are made to screw on the spout. one cap is made to slip on over the spout with a ring attached so it is secured to the spout but the threaded cap is too small will not screw on thats the cap I prefer to use. so I am stuck using the other cap. it fits just don't lose it because it doesn't attach to the spout at all. I didn't feel like sending it back I made them work. yes they work but I had to buy another package of vents to make this kit work.