Konnwei KW850 EOBD OBD OBDII Scanner Reader Car Vehicles Diagnostic tool Detector

Description

-Supports all OBDII protocols, including ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN.Konnwei KW850 OBDII diagnostic features and functions:One click I/M readiness, for rapid emission status without the need for continuous operation of the device.Turns off check engine light, clears engine fault codes & resets monitors.Reads the static data, which is recorded by the vehicle computer if the vehicle breaks down.Views live PCM data stream in text and graphics mode with text and graphics.Reads the result of the on-board monitoring tests for specific engine system components.Storage protection for off vehicle data monitoring and analysis.Supports print out of the diagnostic report via the PC.Displays vehicle information such as, VIN, CID and CVN.Tips:Please ensure that the ignition is switched on when testing your vehicle.(The scanner does not work on hybrid or electric vehicles.) turn off the check engine light and the battery check light.Supports real-time battery monitoring, displays the voltage of your vehicle. A value of <10.8 V [before starting] is too low.Please change the battery, otherwise you may not be able to start your vehicle.A value of 11.8 V - 12.8 V [before starting] is normal.A value of 12.8 V - 13.2 V [after starting] is too low, if you cannot charge the battery please check for other electrical loads.A value of 13.2 V -14.8 V [after starting] is normal, and a value of > 14.8 V (after starting) is too high.This could damage the battery, please check the engine stabiliser.Note:If the current voltage of your vehicle measures 11.9 V after the diagnosis, and this value reduces or stays the same after a couple of hours, it is possible that the vehicle battery is damaged (based on your normal vehicle engine).If the battery does not charge please change the battery.