Britannia Bright Red Playground Paint 5 Litre, Line Marking Paint for Tarmac and Concrete Floors, Slip Resistant Perfect for Schools, Nursery and Carpark

Description

Usesfor tarmac and concrete or any other hard, non-absorbent playground surfaces. For indoor or outdoor use on surfaces where a degree of slip resistance is required. Can be brush, roller or spray applied. Not suitable for very heavy traffic areasspreading rate6-8 square metres per litre for spray application.2-3 square metres per litre for brush or roller application.Dependent on substrate, texture and porosity of the surface.Apply 2 coatsdrying timedrying is approximately 2-4 hours dependent on ambient temperature. Avoid painting when rain is expected or under poor drying conditions – below 5°c.Curing of the coating can be extended at lower temperatures, dependent on coating thickness, substrate and texture.Applicationstir can well before use.Surfaces that are cold – below 5°c – are not suitable for coating. Hot surfaces – above 30°c – should be cooled with water spray before application otherwise paint will dry before film formation is completed.Apply an even coat either by brush, roller or by airless spray.Tip size of 28 thou is recommended for airless spray.A new macadam surface should be left to oxidise for at least four weeks (longer in winter than in summer) before painting.Not suitable for use on open graded macadam or other materials incorporating “cut back” bitumen.New concrete should be allowed to mature for several months before coating.Apply during march to octobernote: Do not apply when air or surface temperatures are below 10ºc or rain is imminent.