Kingspan Insulation SPU Sauna Board 600 x 1200 x 30 mm

Description

The best solution for heat retention for the sauna. The SPU Sauna Satu is used for wall and ceiling insulation in saunas and ceilings in damp rooms. These insulation panels can be used in other rooms as an inner insulation layer of the building with an inner top layer. The SPU Sauna Satu is suitable for both the construction and renovation of capital investments. The amount of Kingspan SPU Sauna Satu needed is only about half the amount that would be needed for mineral wool. For example, if you install the SPU Sauna Satu on the wall, the room in the steam room can be increased up to 10 cm. The aluminium surface reflects heat back into the room, improving thermal insulation. SPU insulation boards are easy to work with and repair. Panels can be cut, recessed, drilled and nailed. The insulation panels are full of tongue and groove on all four sides, which is why the installation of the insulation layer is quick and reliable. Lightweight panels are easy to work with in tight spaces. SPU panels are suitable for insulating stones, frames and wooden structures. SPU panels protect wall and roof structures from mould as they prevent moisture from entering the wall and ceiling construction. The final waterproofing is ensured by the use of sealing foam and aluminium tape in the joints and insertions of the panels. Kingspan SPU will not be damaged by moisture or shrinkage, decay or mold. It can withstand hot and humid conditions, the sauna heats up safely and energy consumption is minimised. Kingspan SPU can withstand a continuous temperature of + 100 °C.