Rempro 4 x 400ml DPC Injection Cream - Treatment & Control of Rising Damp

Description

4 x Rempro 400ml DPC Cream Rempro DPC cream is designed to stop rising damp in walls. By injecting the cream along the mortar bed, it forms a continuous damp proof course to stop rising damp from spoiling your wall. Treat walls with damp course cream applied along the base of the wall to form a continuous DPC barrier. The DPC injection cream migrates to form a pore liner in damp walls to create a chemical damp proof course to stop rising damp. This application can be applied internally and/or externally depending on wall thickness and type of construction. A re-plastering specification should be carried out to complete the process. 400ml application gun required. Damp proof courses should be installed in accordance with the British Standard ‘Code of Practice for Installation of Chemical Damp Proof Courses’ BS6576 (2005). Preparation: Check all rainwater products to make sure that they are in good order. Clean, repair or install drains to carry away any surface water. If your interior floors are below the external ground level, form trenches along the external face of the walls at least 150mm below the proposed Damp proof course level (where the foundation depth allows). If for some reason this approach is unfeasible, the DPC must be placed 150mm above the exterior ground level and the interior walls must be tanked below the course to prevent lateral migration of moisture and salts. Remove any skirting, render/plaster and fixings to expose the line of the proposed DPC. Interior plaster which may be contaminated with hygroscopic salts, should be cut back by a minimum of 1M above the DPC line or 300mm above the highest signs of the dampness or salts. Check your flooring timber for any signs of fungal decay and recommend repair or replacement as appropriate. Ensure that all wall cavities are cleared of waste.