how loud is the unit? Is is too loud to mount in the cab area?

Here is a video I uploaded onto youtube. The compressor is mounted to a piece of 3/4" partical board (I still need to carpet it), which is mounted to some 1"x1"x1/8" angle steel, which I sandwich clamped onto my Garvin Wilderness interior rack in my 2015 Xterra which the legs were wrapped with a few wraps of "F4" or "self fusing tape" as found here on Amazon. The prevents damaging the finish on the legs, and provides another layer of vibration and noise dampening. Please note, I did not rehearse the recording so I say a few mistakes here or there, but you will get the point. https://www.youtube.com/watch?v=TVDWN7hc_Fk

Does the Air Compressor contains the mounting clamp, backing plate, pressure switch, wire loom and all the mounting hardware? or just the compressor?

I cannot believe Amazon and ARB have not jumped on the fact that they do NOT list "what's in the box"! Shame on Amazon!Check the ARB website.It does indeed come with all you listed above except I am not sure if it has the mounting clamp or backing plate. I bought mine as a replacement for the same unit after 7 years of service. I did not need anything except the compressor. Good luck.

Simple question: Can you run front and rear lockers with this compressor?

Yes you should be able to run both front and rear air lockers off this compressor. As well as air up tires!Thanks

Will this fit and work mounted in the storage pocket under rear srorage on a 2 door 2008 jeep wrangler

i don't know, sorry! Most of the people install it under the hood of the engine, I have also seen it installed under the car near the gas tank, it is really small and you can place it anywhere since you control it from your cabin by a swich. if you are going to use it only to inflate the rubbers, it is fine anywhere, but if it is for use with blockers I recommend you under the engine hood.

Brand	ARB
Voltage	12 Volts (DC)
Recommended Uses For Product	Air Horns, Air Lockers, Pneumatic Tools, Products Inflation (Balloons, Balls, Mattress..), Tire Inflation
Power Source	12 VOLTS
Special Feature	0740110 TWO ARB Branded 90 degrees Elbows JIC4 Male 1/4" NPTM, 0740113 ARB Branded Air Hose Coupling Dust Cap, 074203 ARB 1 Meter Braided Air Hose, 171314 ARB Remote Hose Coupling Kit, Includes Quick Connect Coupling and 3 Way Mounting Bracket, Includes Part Numbers: ARB TWIN AIR COMPRESSOR PLUS+
Included Components	0740110 TWO ARB Branded 90 degrees Elbows JIC4 Male 1/4" NPTM, 0740113 ARB Branded Air Hose Coupling Dust Cap, 074203 ARB 1 Meter Braided Air Hose, 171314 ARB Remote Hose Coupling Kit, Includes Quick Connect Coupling and 3 Way Mounting Bracket
Item Weight	23.5 Pounds
Maximum Power	0.17 Horsepower
Capacity	4 Liters
Color	Inflation3
Material	Aluminum
Product Dimensions	7.48"L x 4.02"W x 10.83"H
Style	Inflation Kit 3. Mounting Accessories
Air Flow Capacity	3 Cubic Feet Per Minute
Motor Horsepower	0.1667 horsepower
Compatible Hose Diameter	0.25 Inches
Model Name	CKMTA12 INFLATION3
Tank Volume	4 Liters
Manufacturer	ARB
Maximum Horsepower	0.17 Horsepower
Part Number	INFLATION3
Item Weight	23.5 pounds
Item model number	INFLATION3
Item Package Quantity	1
Special Features	0740110 TWO ARB Branded 90 degrees Elbows JIC4 Male 1/4" NPTM, 0740113 ARB Branded Air Hose Coupling Dust Cap, 074203 ARB 1 Meter Braided Air Hose, 171314 ARB Remote Hose Coupling Kit, Includes Quick Connect Coupling and 3 Way Mounting Bracket, Includes Part Numbers: ARB TWIN AIR COMPRESSOR PLUS+
Batteries Included?	No
Batteries Required?	No

ARBINFLATION3 Twin High Performance Air Compressor CKMTA12 and Extension Hardware for Easy Installation and Connection in a New Printed Box, Ideal for Lockers, Horns, Tire Inflation and Air Tools

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions