Acidalie M.2 SSD heatsink for PS5 and PC with Aluminum and Copper Heat Pipe Cooler M.2 PCIE NVMe SSD(2230/2242/2260/2280)

Had to get a replacement, the first was sent in a bubble mailer and was crushed in transit/ bent. Fit it to my WD_Black SN770. It's a full length M.2. The kit includes a precision screwdriver which sped up install. I've never used thermal pads, but applied accordingly. I was able to drop my HD temp from 55-60C running MWII to a max of 45C. My target was to get under 50C.

I like the idea of the heatpipe.Installation would have been easier if the instructions were clear about which adhesive heat strip goes on the bottom and which is on the top. The perforated one goes on top.It's nice that it comes with offsets for the different size nvme options. And it comes with the hardware and screwdriver needed for installation.

Buenos materiales de construcción, un disipador interno en cobre y sus respectivas almohadillas térmicas, he logrado bajar casi hasta 20 grados, cuando el equipo está en todo su capacidad de uso

Pros. Low profile, drive stays cool.Cons . Lower plate has to transfer heat to the top heatsink, there should be thermal paste applied to both sides to accomplish this at the contact points. Thus the screws need to be tight. One of mine was stripped, but Amazon exchanged it.Other. Amazon’s exchange policy makes me want to buy evetwith them instead of other online vendors.

Nicely machined metal. I also love the small touch like including a little screw driver that is surprisingly nice quality for a freebie. Has a heatpipe which is why I chose it over the other options.

Lighting shipping as usual, and the heatsink quality is way above my expectations, especially considering it is one of the lowest cost items listed. Packaging (inc. clear instructions) is very professional, and the fit and finish of this sink couldn't be better. If you can't tell ... I am thoroughly satisfied 😉

It's the cheapest heatsink with a heat pipe on Amazon, yet the quality is relatively good and it works well on ps5. I did not fully tested the performance but the temperature on my pcie4.0 ssd is significantly lower than without a heatsink.

followed the directions yet it doesn't fit.

1.マザーボード附属のヒートシンク(34℃)より７℃低い2. 切れ込みのあるパッドは、各ユーザーが使用時に切ればよいのではなかろうか3. 長尺方向がもっと長ければより効果的と思う(ねじ穴を工夫)

KIOXIAとMicronのものに装着したのですが、KIOXIAの方は装着するとSSDが認識されず、スロットを変えたり、装着しなおしたりしてもダメでしたので使用を諦めました。Micronの方は正常に使用でき問題はないのですが、すべてに上手く装着できないようなので安定性の評価を３とさせていただきました。

今のところPS5で普通に使えてます。シリコンシートは別途購入し、両面に付けました。

[ASIN:B087DV6L4X　Fractal Design Era ITX ]というコンパクトで通気の悪いケースにて使用。もともとはマザーボードの表側にて標準のヒートシンクの替わりで使用していました。その際はアイドル時61℃⇒53℃に改善。さらにマザーボード裏でも入るか試してみたところ、普通に取り付け可能であった。その際、M.2に元々取り付けられていたヒートシンクではアイドル時65℃⇒本機にて54℃に改善。負荷を与えた際も30分程度なら70℃以下で運用可能。価格も安く取り付け簡単。小さなヒートパイプでもそれ相応に威力を発揮し、それでいて大きさも最低限で済ませているので、ケース内が狭い方にこそお勧めです！

Seagate FireCuda 530 2TBと組み合わせると、PS5のストレージカバーに接触します。両面実装のSSDを使う場合はお勧めできません。