waveshare RP2040 MCU Board with Pre-Soldered Header, Onboard 0.96inch 160x80 IPS LCD Display, Pico-Like MCU Board Based on Raspberry Pi RP2040, Dual-Core Arm Cortex M0+ Processor

Description

Overview RP2040 MCU Board with Pre-Soldered Header,onboard 0.96inch IPS LCD display. Pico-like MCU board based on Raspberry Pi RP2040. Compatible with most of the Raspberry Pi Pico add-on modules. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For software, Support C/C++，MicroPython. In additional, It is onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high efficiency DC-DC buck-boost chip. Features RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2MB of on-board Flash memory. USB-C connector, keeps it up to date, easier to use. 0.96inch 160×80 pixels 65K colorful IPS LCD display. Lithium battery recharge/discharge header, suitable for mobile devices. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch. Castellated module allows soldering direct to carrier boards (there should be dedicated cut-out for embedding the bottom components). USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 26 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip. 8 × Programmable I/O (PIO) state machines for custom peripheral support. Package Content RP2040-LCD-0.96 with pre-soldered header x1