How to Use: The mold is filled with cement mortar, compacted (make sure all voids are filled) and smoothed, and the model is removed after the mortar has dried and solidified Specification: Item Type: Wall Mold Form Material: ABS Weight: Approx. 1000g / 35.3oz Total Product Size: Approx. 49 x 68.5 x 2.6cm / 19.3 x 27.0 x 1.0in Single Brick Size: Approx. 24.5 x 6.5cm / 9.6 x 2.6in Application: Suitable for Parks, Garden, Home Decoration Package List: 1 x Wall Mold Form Note: Prepare the molds: Before mixing the concrete, make sure the molds are clean and free of dirt. If it has been used before, clean it with soapy water or industrial alcohol. Brush just a little light vegetable oil or mold release agent into the forms. A mold release agent is recommended, but not required. Not using a release agent will make the stone more difficult to release and you will need to be more careful about damaging the mold. However, too much release agent can cause bubbles to form on the appearance. Mixing concrete. Always wear proper safety equipment (rubber gloves and anti particle face mask) when mixing concrete. Mixing can be done by hand using a proper concrete mixer, a wheelbarrow with a concrete hoe, or with a shovel in a bucket. It is very important to take the time to mix everything completely. Tip: Adding coloring to the concrete will make the stepping stones look more natural and beautiful. Filling the mold. Fill the bottom of the mold with concrete and tap it firmly to remove air bubbles. Then fill the mold completely to the top and glossy the top appearance by hand so that the concrete is flat and level. Finish the mold by tapping and shaking to get rid of as many air bubbles as possible.
Trustpilot
4 days ago
1 week ago
1K+ bought in past month
900+ bought in past month
500+ bought in past month
400+ bought in past month
400+ bought in past month
300+ bought in past month