Adhesive Electrode

Description

Belifu electrode pads are compatible with Standard 3.5mm Snap-on Connector 1. Clean and dry the skin at the prescribed area thoroughly with soap and water prior to application of electrodes. Skin must be clean and dry. Dirty or oily skin will prevent electrode adhesion. 2. Insert lead wire to the connector of electrode, making sure no bare metal shows. 3. Remove electrode from protective liner. DO not remove by pulling on the wire connector. Save liner for electrode storage. 4. Apply by pressing electrodes firmly onto skin. If necessary, clip excess hair with scissors. 5. Repeated application may be improved by doing the following: Wash adhesive gel for one second under cold running water. Shake off excess water. Then air-dry for 1-2 minutes before reapplying. Be sure not to over- saturate with water, as this will reduce the adhesive quality.