Ingerik Universal Gate Car Garage Door Car Alarm Cloning Remote Control Key Fob 433mhz（Need DC12V 27A Battery，not include）

Description

How to Program: Asthe fob has code when produced, you need to clear it before copying. Clear: 1.Hold buttons A and B down simultaneously.(the top two buttons) 2.The LED will flash 3 times. 3.Continue holding down either button A or B while releasing the other. 4.After releasing either A or B, press the non-pressed button 3 times until the LED flashes continuously. 5.Once the LED is flashing continuously, release both buttons to complete the reset. Program: 1.Hold down the button on the original remote you want to copy while simultaneously pressing and holding which button you want to program on the provided fob (A, B, C, D). 2.The process will be complete with the fob LED flashes 3 times. 3.Repeat the above process to program other buttons. Works with the following remote control IC modules (please check your original remote control before ordering),and your remotes also should be Fixed code or Learning code. 2262,2260,5026,5326,5326-3,5326-4,FP527,PT2240,EV1527,HT6010,HT6014,HT12E,HT640,HT680,PLC158,PLC008,SMC918,SMC926,PT2292,12L-4SC,HT6026, UM3750AM,etc Notice: The essential condition for the selection of the remote control;the copyed remote control operates normal,chip is compatible and frequency is correct. Before buying,please make sure the copyed remote control operating frequency or choose & buy the frequency adjustable type remote control. Before buying,please confirm whether your remote control can be copyed or not. Our remote control can copy the fixed codes and learning codes rather than stealth codes.It can't copy original car remote control, two-way remote control and rolling code remote control (Rolling code chips start with HCS commonly,such as HCS200,HCS201,HCS300,HCS301,etc) Notes: This copy of the remote control can not copy a computer code and rolling code , the device can only copy fixed code or learn codes.