Comidox 3S 12V 10A 18650 Lithium Battery Protection Board BMS Li-ion Charger Protection Module Anti-Overcharge/Over-Discharge/Over-Current/Short Circuit 3Pcs

Comidox 3S 12V 10A 18650 Lithium Battery Protection Board BMS Li-ion Charger Protection Module Anti-Overcharge/Over-Discharge/Over-Current/Short Circuit 3Pcs

Q: Will this bms work with a 3s5p 18650 battery pack?

it should work, but it sounds like you might want to be drawing significant amperage, and these will limit you to 10 amps, you should try not to need more than 5 amps through these if it is continuous current. if you are going to do this with these BMS , you will want to make sure the batteries all perform nearly identically, because charging will stop when one of the sets of 5p reaches 4.2v, so if one cell out of those 5 charged to 4.2v while the other 4 are still down at 3.9v, you will never get maximum potential out of the 4 cells, because they will all stop charging every time. if this offset becomes large enough, you could have one cell charging the other cells "balancing" to have the same voltage, this could produce more problems down the road after several cycles. i only like to use them with 3 cells in series per BMS. i have considered using 2 or 3 bms in parallel to make a larger bank, but i didn't want to put more than one cell per terminal on the BMS

Q: How would i adjust the voltage for use with 1.5v batteries such as aa or aaas?

It is not the battery form factor that determines the compatibility. It is the chemistry. These will work with 3 rechargeable Lithium Ion or Lithium Polymer batteries (3.7V nominal, 4.2V totally charged) in series. I am using it with 12 cells of 21700 batteries in a 3S4P configuration. A pack of 3 AA or AAA Li-Ion or Li-Po batteries should work just fine.

Q: What is the output voltage and amperage from P+ and P-?

Specifications: 3 strings: 3 18650 batteries or polymer lithium batteries in series Polymer battery rated voltage: 10.8V Rated voltage of 18650 or 3.7V lithium battery: 11.1V After the lithium battery is fully charged, the voltage is 12.6V. Maximum discharge current limit: 10A Overcharge voltage range: 4.25-4.35v±0.05v Over-discharge voltage range: 2.3-3.0v±0.05v Maximum working current: 5-8A Maximum instantaneous current: 9-10A Quiescent current: less than 6uA Internal resistance: less than 60mΩ Working temperature: -40---+50 °C Storage conditions: -40-- +80 ° C Effective life: more than 30,000 hours

Q: Is there a minimum output to keep these alive? my application only draws about 60ma. some bms units require more.

I drew 40 mA, and it shut off to protect the batteries exactly as it was supposed to.

4.3/5

Product ID: 342908041

Secure Transaction

Details

Brand
Comidox
Colour
Black Blue
Output voltage
12 Volts
Input voltage
12 Volts
Charging time
30000 Hours

⚡Multi-layer protection tech

🔋12V 10A power output

🛡️High-grade MOSFET safety

Frequently Bought Together

Comidox 3S 12V 10A 18650 Lithium Battery Protection Board BMS Li-ion Charger Protection Module Anti-Overcharge/Over-Discharge/Over-Current/Short Circuit 3Pcs

DIYhz Push Button Switch, Self-Locking Mini Switches Latching 10mm Round DC24V 0.5A Black Cap 5PCS

DIYhz GX12 2 Pins Panel Metal Mount Circular Metal Aviation Connector Adapter Male Female Plug Socket with Waterproof Cap (5 Pcs)

Description

🛡️ Power up with confidence—because your gear deserves elite protection!

COMPACT VERSATILE - Small form factor fits seamlessly into vacuum cleaners, LED backups, solar street lights, and more—ideal for the multitasking professional.
PREMIUM COMPONENTRY - Equipped with top-tier MOSFETs from VISHAY, AOS, and IR for unmatched reliability.
POWER PACKED PERFORMANCE - Delivers a robust 12V and 10A output, perfect for your high-demand devices.
COST EFFECTIVE INTEGRATION - Designed for high integration at a low cost, ensuring you get maximum value without compromise.
COMPREHENSIVE BATTERY DEFENSE - Built-in safeguards against overcharge, over-discharge, over-current, and short circuits keep your battery pack ultra-safe.

The Comidox 3S 12V 10A Lithium Battery Protection Board is a compact, high-performance BMS module designed to safeguard 3.7V lithium battery packs. Featuring advanced protections against overcharge, over-discharge, over-current, and short circuits, it utilizes premium MOSFET components for reliable, long-lasting battery safety across various 12V electronic applications.

Have a Question? See What Others Asked

Will this bms work with a 3s5p 18650 battery pack?

How would i adjust the voltage for use with 1.5v batteries such as aa or aaas?

What is the output voltage and amperage from P+ and P-?

Is there a minimum output to keep these alive? my application only draws about 60ma. some bms units require more.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Pooja R.

The customer service exceeded my expectations. Perfect for buying products you can't find elsewhere.

1 week ago

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

283 Br

Duties & taxes incl.

Belarusstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

View all Trustpilot reviews