SENSTREE Water Flow Control Meter LCD Display Controller+G1" Water Flow Hall Effect Sensor Flow Meter 1-60L/min+G1" Solenoid Valve Normally Closed N/C+DC 12V Power Adapter

Description

This DFC15 controller is used to measure and control the flow of liquid, it can control solenoid valve on/off when the flow reaches to setting value. It is suitable for hall effect flow sensor. Large LCD screen can display the flow rate, volume, and the temperature of the liquid.FEATURESWater meter:DFC15 can be used to measure the volume of waterAdjustable accuracy:Calibrate the accuracy through adjust the K parameterEasy-to-Read Front-Panel Liquid Crystal DisplayTECHNICAL SPECIFICATIONSFor DFC15 Controller:Controller Power Requirement: 12VDCPower Adapter: Input: 100-240VAC; Output: 12VDC, max 2AAdapter lead length: 1mMeasuring Accuracy: ±1%Output for Solenoid valve: 12VDC, max 5ATemperature Sensor: 0-125℃/32-257℉, NTC3950, Accuracy: ±1℃/±1℉ thread: M8Max Total Volume : 999999 G/LQuantitative Range: 0-9999.99 G/LFlow Rate Range: 0-9999.99/LPM(GPM)Cable Length : 1mDimensions: 88mmx126mmx30mmWeight: 200gOperation Environment: Temperature: 0-50℃/32-122℉; Relative Humidity: <85%For G1" Flow Sensor:Flow range:1-60L/minAllow compression:Water pressure 1.75 Mpa belowCable length:15cm.For G1" Solenoid Valve:G1",thread male outer diameter: 32.5mmWorking pressure:0.02-0.8MpaWorking Voltage:DC12VNote:1, This controller work with the solenoid valve up to 5A, but this kit come with 2A power adapter. If drive a large solenoid valve, please use suitable power adapter.2, Ensure the solenoid valve and flow sensor direction is the same with water flow.3, Please use teflon on the thread when requirement, ensure don't leak.4, The wires can be extended up to 10m.5, Avoid the water into the controller.Package includes:1 x DFC15 controller1 x G1" flow sensor1 x G1" solenoid valve1 x Power adapter1 x Temperature sensor1 x Manual