All Balls Racing Carburetor Rebuild Kit 26-1608 Compatible With/Replacement For Honda VF750C 1994-2003, VF750C2 1997-2000, VF750CD 1995

I bought this kit to completely repair the carbs on my '99 Honda Magna.The original rings and gaskets were completely torn and leaking fuel.I completely disassembled the 4 carbs, cleaned and re-cleaned all of the parts, then, installed majority of the parts from this kit. I ended up not using the needles, as the ones currently installed were still good, and I believe were upgraded.I did use all of the other items, screws, gaskets, jets, rings.Although, this is mostly human error, I did have 2 of the bowl rings get slightly pinched while installing them, and they kept popping out. It took some patience and flipping the carbs right-side up, as like being installed, to get the rings to seat correctly.Also, I modified the Single-D adjustment screws provided, and cut a single notch into them, to use a flathead screwdriver to adjust. I know, I should have the proper tools, or, change them out to something else, but, this works just fine.Overall, no more smelling gas, or seeing leaks from the carbs, and, they run better with the cleaning and new gaskets. Very much recommend this to anyone looking to overhaul their carbs!

Would be great if they had some instructions with it.

Cleaned carb bodies in an ultrasonic bath, reassembled parts, sync’d on bench and again on the bike after warming up. Upper performance is okay, dropped my typical mileage from 39-42mpg down to 35-38, decel has occasional popping that can’t be tuned out with mixtures between 2.75-3.5 turns out. I’m thinking the jets are a hair different in size than the originals I removed. It’ll work with a little perseverance. I may swap back to the original jets next time the carb is off.

All balls carb rebuild kits are the best and always come with the stuff you need to replace all the (go bad parts) seals are always a great fit.

Great carb rebuilding kit. Installed but not tried out yet. Everything looks great.

Has everything you need for a Magna carb rebuild except 3 (12 total) little o-rings you need for the air cut-offs on each carb. Besides that, everything can be replace that needs to be replaced.