USX MOUNT TV Wall Mount for 32-65 inch Flat Screen/LED/4K up to 110lbs, Full Motion TV Mount Bracket with Swivel & Tilt Articulating Dual Arms, Max VESA 400x400mm, Fits 12/16" Wood Studs

These mounts are outstanding. Here's why: The mount itself is incredibly well-made. The assembly, the welds, and the finish are all top-notch. There is a lot of thought in the design. These are affordably priced but thoughtfully executed from the inclusion of. small level, to generous mounting options for the TV, and features such as adjustment for out-of-truth install. That's nice. I had no issues installing it other than working out the height. I did not fully follow the instructions as I did not want a 75" TV hanging around while I installed the mount. However, I would have installed it once had I done what the instructions said! I managed to install it the first time too high. Even after lowering it 3 inches, it still partially occludes the center channel speaker. That's my problem, not theirs. But if you do as they say and mount the TV to the hangers first, you will have. better idea of where the bottom of the TV will be, and so from there, you can adjust your height. So, long story short... follow the instructions! Haviong said that I used vaseline on the securing bolts, which was a good thing as they are tight to drive into the studs. Here is the only area where I can level some criticism. The 13mm lag bolts are a tad off standard size, and so they were a little damaged by the reuse. They are a little soft. Just be aware and use a good quality socket set to install to minimize the impact of sub-par sizing. Also, make sure to drill the holes to the recommended depth or you will struggle to close the last bit as you tighten them to the mount. I did not have that issue, but this is not the first TV mount I have installed! Also, make sure to use a good-quality stud finder. I use a Bosch sensor, had it for about 12 years and it works just great. You may want to review the tool list before you get started on this job to make sure you have everything. This mount is a little different from the smaller 8-12-16-inch mount. To achieve the mounting size, it uses fold-out ears on the track. That's pretty novel. So the package is the same size as the smaller mount. At first, I thought Amazon had sent me the wrong mount as I expected a larger box! The one issue you may face with such a large track is the wall uneveness. My wall has a 1/4" deflection that is difficult to adjust to when installing. However, after bolting all four lag bolts in, it was snug to the wall. The assembly for the TV mount is very straightforward. You assemble the two cross braces from four discrete parts. There are two plastic trim pieces at the end, which is a nice touch and makes it more finished. Once this is done, you check the install for strength to make sure it and the wall will take your TV. Then you get the fun job of mounting the TV to those installed cross braces. We left the TV safety packing strips on the front of the TV as it is very easy to break the screen when installing it by excess pressure in your hand grip with the TV (mine weights 62lb.) I suggest afterwards that you keep those with the TV and reattach them when you have to remove the TV in the future. These help avoid compression fracture of the screen. One issue with any of these mounts as you try to attach a large screen is that the mount tends to move away from you to the wall. So it's a little dance to get it mounted. Once installed, make sure the TV mount is over both cross-member rails. Then you flip up the top securing clips and secure these with a small screw. The final steps are setting up the viewing angle and correcting for any level issues. Once we got that all done, we tested the +TV with the screen protector still attached. This allows for quick removal if needed. We only removed that after we had the TV and mount both working to our satisfaction.Once installed, the TV is a breeze to move. One thing to be careful of is you could end up pushing it hard into the wall if you are not careful, and that might be damaging to it or the wall. But its really easy to set up the viewing location within the limits of the mount. Overall, really impressed with everything about this TV mount. Deifnitly recommended. We mounted a Hiisense QD7 75" TV using this specific mount. Installation was straightforward. One really nice thing with this mount is that it's easy to access the rear of the TV to make connections. For me, it's worth paying the extra for this mount for that functionality. 100% recommended. By the way, this supplier is excellent. It was not hard to return the smaller 8-12-16 inch mount when I found the studs in my desired location were 17" on center (one stud!) exactly where I needed to mount the TV. They do supply rails to overcome this, but they would not work in this specific application. Returning them (we bought 2) was a breeze. But I recommend buying this mount instead (the cost difference is minimal) and saving yourself the potential aggregation of the issue shared. It's great when you have a great product and a great supplier on Amazon!

I was looking for a wall mount for my 50-inch old-school plasma TV. Normally, looking for a mount wouldn't be a difficult task, but this was an old TV from the early 2000s, and it weighed close to a 100 pounds. So, the journey began, and I began searching for a heavy-duty wall mount that could not only fit the size of the TV but also handle the heavy weight. The wall mount came quickly, and I was able to unbox it and pull out all of the parts that I needed for the install. As with most wall mounts, the packaging was really good, but the instruction manual was very short and could use some work. I installed wall studs into my wall and the other side did not have any studs, so I used drywall anchors. I then proceeded to install the mount and hung the TV up and the mount is working perfectly till this day. What I love the most is that the mount is extendable so if you want to pull the TV closer to you, you just pull the TV gently with the mount and it will come out and if you want to push it flat against the wall, you simply just push it backwards flat against the wall. The quality of the mount feels very heavy-duty as it should honestly because it is rated for TVs such as mine which are very heavy in weight. Overall, I'm very satisfied with this purchase. It did exactly what I wanted it to do. The only thing I disliked as I mentioned before was the instruction manual could be a bit better, could be colored and much better manufactured for ease of reading. Overall, I would highly recommend everyone to go ahead and get this wall mount if they need to hang a TV of this size and weight.

Priced very well and perfect for my built in fireplace. Needed it to mount my 50 inch tv!I was nervous but turned out to be very sturdy. Easy to install and swivels well.

Looks great with tv

I needed a mount that was compatible with large (600x600) VESA as well as 24” stud spacing. This met both requirements and was reasonably priced. My experience with TV mounts in the past, I assumed I would ensure the template was level, full pilot holes then drive the lag screws into the studs. Not this TV mount! First if you require >16” stud spacing you’ll need to flip out the wall brace extensions, and install a locking screw for each before you can use the template to level and start your pilot holes. One you have it on the wall, it’s time to hang the TV…. the TV cross beam supports, 2 of them, each with two different parts you must add to the contraption and make sure you pay attention to the orientation of these 4 parts or you’ll be redoing this part. Now the TV support supports- vertical bits to keep the TV supports parallel. Now you can add your TV, but don’t forget to bolt theses around these parts eitherAnd now you should have a wall mounted TV - and less time to enjoy your RV today

Got this for my 65in insignia smart tv from Best Buy. Super easy to install. You mount base onto wall them screw the 2 poles on the back of the tv and you just hook the tv right onto the base. I love this because if you ever need to take the tv down or decide to get a new tv you don’t have to reinstall the whole mount. It’s full motion in deed can pull it out push it it or turn it left/right or push it to the left or right. Great but would highly recommend.

I got this for a 70” tv. I did not trust any of the other ones I saw. Able to bolt to two studs not just Sheetrock. I also like that it can be tilted and swiveled, and pulled away from wall. Makes it easy to access back. When I travel, trying to plug my laptop into the TV with mounts that don’t have these features makes me appreciate these features even more.