MoKo Compatible with iWatch Stand, TPU Charging Station Dock Support Nightstand Mode, Fit iWatch Series 6 5 4(40mm/44mm/42mm/38mm), iPhone 11 Pro Max/11 Pro/11 - Black

This is the perfect solution to finding a nightstand for my Apple Watch. I had seen others by ElevatioLab, Orzly and Spigen but they all had their own flaws like poor cable management (Spigen), slick on smooth surfaces unless you permanently stuck it somewhere (Orzly) or no support for pressing snooze (ElevationLab). This design by MoKo takes all three problems into account with a base below the charging pad, some sort of tacky but not permanent adhesive on the bottom and a groove on both sides of the back to guide the cable to the wall. Very pleased with the quality and features for the price!!!

I like the stand, it stays put where you set it and holds the watch nicely but the charging disk was very difficult to get in the pocket in the back. Once I had it in it caused the stand to lean forward instead of slightly back as it does when you pull it out of the box. After about half an hour the charging disk popped out of the back due to the pressure. It's an $8 stand and I didn't feel it was worth sending back so I took a knife to it and removed the three rubber pads from the bottom of the charging disk pocket. Now the disk fits in easily, it doesn't pop back out and the stand still leans back. A free engineering change from me if the manufacturers are listening.

Purchased this stand for a 44MM Apple Watch, which is enclosed in a TPU case (https://www.amazon.com/gp/product/B07V3143ST/), and the stand works well.Out of the box, the watch would attach to the magnet, but it would not charge. However, once I removed a small small rectangular piece of padding on the dock itself (attached to the dock by tape), the charging issue was resolved. I didn't read the instructions, but I assume this small piece of padding was intended for the smaller 38mm watches, i.e., to raise the height of the watch so it charged properly. I have not removed the backing on the silicone base, so I haven't tested out how well the stand sticks to my nightstand.Overall, for $5.25 (I purchased from Amazon Warehouse), this is a useful yet inexpensive accessory for an Apple Watch.P.S. I used an OEM Apple Watch charger with the stand, and an aftermarket charger may not fit in the slot for the magnetic charging surface.

I've now purchased three of these, one for myself, one for my S/O, and one for my sister as a stocking stuffer this year. I am very happy with these, and how well they work. I also love the price.I have a 42mm watch, my SO and my sister both have 38mm watches. The stand works well with both sizes. The little strip of plastic that adapts the stand for 38mm watches seemed like an inelegant solution at first, but after seeing it, it actually works better than expected.I love how simple the stand is. When I got my watch right when they came out, I bought a super complicated stand that needed the charger wrapped up in a complex way. It was a pain, and every time I needed to travel, I needed to take the cord in and out and it was a pain. This stand is much simpler, and it is so small that I even take it with me when I travel. It works perfectly with nightstand mode on the watch, and presents a much easier way to charge than dealing with the cable laying flat on the table.I also love how inexpensive this little stand is. It works so well and for such a low price. I am very happy with it.

I love this thing! I don’t have a clock on my nightstand because I am one of those annoying people that HATE any type of light in the bedroom to sleep. When I want or care to see what time it is, I tap my watch & a pleasant, dim, green light comes on to display the time on my watch briefly-for those of you who own Apple watches. I like the Moko brand because I bought a dimming nightstand lamp by Moko & love it. It has a very very dim, like yellow-type of warm light & it goes all the way up to very very bright LED bright white. It’s awesome to read with or just to have a lamp on your nightstand before bed or early in the morning. The light omitting from it is never offensive to my eyes. So I placed this stand right in front of my lamp & love it! Moko products are pretty good! I’m glad I purchased this stand & their lamp!

This nightstand charger for the Apple Watch fits the watch nicely and holds it in a perfect position for "nightstand mode" viewing and charging. The stand is heavy enough to stay where it's placed, yet nicely compact to conserve space. It's a simple item; just a hole for your Apple Watch charger, and two wire channels to steer the charging wire toward either side of the stand. Note that this is merely a stand; it does not include a charger.My unit came shipped poorly packaged; the box was open and crushed upon arrival, but the unit appears undamaged.

This little stand is exactly what I wanted!I love using the nightstand mode for my iWatch, but it constantly fell. Since I have the iWatch series 2, I was worried they might have changed the charger size, but it fit perfectly.Also, my stand came with a peel-off adhesive strip on the bottom, but I didn't need it. It's perfectly stable on my nightstand without adding an adhesive to my nice furniture.It's an inexpensive product, but works perfectly if you're like me and always looking for the plug every night and then knocking the darn watch off the table.

I own a  Apple Watch Stand  for my desk so I bought this dock for my car and installed it upside down under my center console lid that has a USB input. It works great!

This works perfectly for the 38mm watch (1st gen). I did have to add a touch of glue to the pad that you add for the 38mm watch as I found the strip of adhesive was not quite enough to keep it in place (sometimes when removing the watch from the stand, the little rubber strip would come away from the stand and be stuck to the watch). A touch of super glue sorted that out no problem. The charging cable that comes with the watch fits perfectly into this and the cable itself sits perfectly in the channel behind, making it a tidy addition to any desktop.Certainly makes it a lot easier to charge the watch and also for using the watch as a night clock etc.

You need to fit your own charger cable as it doesn't come with one. It doesn't feel like its fit correctly but it seems to work. Holds the watch well. The desktop stickiness wears off and no longer sticks it down after a month. I'm worried that theres a bit of stress on the cable where it comes out of the magnetic disc because it has to be forced into a tight bend in order to fit it into the stand.

Genuinely surprised by the quality of this stand. I have seen several, really expensive stands which effectively do the same thing, and for this price, you simply can't go wrong.At the end of the day, an iWatch stand is simply plastic/wood/metal etc moulded to house the charger and keep the watch face showing in a way that it is easily readable. This stand easily meets those requirements, and has a solid build quality. I admit it may not look like the other stands available in terms of design, but I'm more of a functional and practical person and this does the job!

The watch fits the hole and it does it’s job. However, for the price I would have expected a bit more than a lump of rubber. A charging cable would have been useful and so would a non slip bottom.

It's just a cheap piece of plastic. Not worth the price. Wouldn't pay anymore than £2.50 for it.Arrived in a damaged box and was squashed.Save your money and get something better.