RFID Locks Kit Battery Electronic Cabinet Lock Door Wardrobe Hidden DIY Lock Keyless

Description

Specification: Material: ABS environmentally friendly material Size: lock body 8.6*6.3*2.8cm latch: 4.8*3.6*1.6*1.6*2.1cm Package Includes: 1 x RFID lock 2 x RFID card 2 x Keychain Fitting screw Note: * Cabinet door should not exceed 1.2 inches thick * Requires 2 AA 1.5V batteries * An audible alarm will sound when the battery is low * The battery can be used for 8-12 months under normal use. Instructions * Reset the installation of 2 AA 1.5V batteries and press the reset button on the back of the lock until a long beep sounds. * After creating a management card reset lock, swipe the RFID card/label and this first card/label will be configured as a management card. * After selecting the unlock mode to set the management card, you should select the unlock mode. (1) Short press the reset button, then release, if you hear a short beep and a long beep, this applies to single mode. (2) Short press the reset button and release. If you hear two short beeps and a long beep, this applies to dual mode. * Add a user card to slide the management card, then slide the new card you want to add in the beep. * Deleting a card is the same as resetting. Press the reset button on the back of the lock until a long beep sounds and all management and user cards will be disabled. You can then set up a new management card. * Use a 1.5V AA battery for low voltage alarms. When the card is unlocked, the voice alarm will sound when the battery is low (you will hear a long beep). You can still slide the card to unlock it to the maximum extent possible. 50 times Please replace the battery in time.