Flash FurnitureKale High Back Designer Gray Mesh Executive Swivel Ergonomic Office Chair with Adjustable Arms

The media could not be loaded.  Shockingly high quality. Longevity a question mark, but treat it well and this is probably well worth the price.My impression is from the first 48 hours of owning the chair; I bought a pair of them for an office — but ... I do have a decade of engineering experience and I’ll use that to give a highly detailed review!There are three or four main materials at play here: polycarbonate, steel, mesh fabric, and vinyl. Throw in some stitching, zinc and brass plated fasteners, and miscellaneous softer plastics and you have the whole picture.Starting from the base: The casters are fairly standard plastic with steel or zinc-coated base metal shanks. No surprises here. Replace with urethane if you want to not damage hardwood floors. The 5-pointed base itself is dense polycarbonate. Don’t mistake this for metal! It’s well engineered and has only a few minor flashing points made during mold separation. During assembly the hydraulic assembly is pushed unceremoniously into the base and it wedges in nicely. Disassembly is possible with some force but it won’t slip on you.The seat of the chair bolts to the bottom attachment bracket with 4 m6 bolts. Black oxide here again no surprises. Some slight head oxidation means your chair is likely sitting in a warehouse for around 4-9 months before shipping to you. No big deal but worth noting.The actual seat is fabric with a vinyl edge. Compression is about 1/2 to 3/4 inch natural with a minor forward bias. This is great and keeps your posture on point, but you may feel you are “slipping” out of the chair if you try to sit in it improperly. Having the base of your back aligned with the chair back will do wonders for you.Stitching appears to be of reasonable quality on the vinyl edging and armrests. Those are soft vinyl too and will be your first failure point after a few years of use. Don’t fret! These are easy to reupholster! Search on YouTube for guides.Overall the arms have some slight side wiggle to them that comes from their cheap push-button up/down operation. Normal. A little annoying if you like to adjust arm height a lot. Not a big deal overall. More molded plastic here; good quality like the base.The arms bolt to the seat and to the back of the chair... and THAT IS WHERE THIS THING SHINES.The back of this chair is large but not immodest and insanely comfortable. If you sit properly in this chair it feels better than some $1000 chairs. I am not kidding. I own some (admittedly used) $1000 chairs I also got for a steal. These are better. I am serious.The back of this chair feels luxurious and supportive with zero pressure points. It’ll be comfortable up to around 6’6” in height, and around 250-275lbs. Over that you should get a larger chair. (I’m 6’x170 for reference)To finish up: the mesh of the back is bolted securely to the frame which has admittedly decent looking slots for air to flow. It looks a bit spinal but it’s all black so doesn’t distract from overall aesthetics. Some included rubber end caps even cover the screws that secure the back to the seat. These will keep those black oxide screws from rusting underneath. (More m6 here by the way, with 12 used in total)As you can tell, I’m honestly very very pleased and will be buying more of these. Possible future wish-list inclusions would be a mesh seat and bottom tilt adjustment. The slight forward bias may be annoying to some who don’t like to sit far back in their chairs with good posture. But it’s not a deal breaker at all.5 stars for overall quality and feel4 for aesthetics, mixed bag here5 for ease of assembly4 for materials. Black oxide fasteners do rust and vinyl can flake over time.3-4 for packing. Honestly everything was just jammed into the box but it seemed fine on delivery across both unitsAveraging this to a solid 4.5-5 for the final review.I almost don’t want to leave this review because I feel like I’m letting people in on a clever secret. But there you have it. Get one. Get two. Enjoy them. Value is all there. And I’m big on sustainability. Spending more won’t get you dramatically far from this even if you find more features in other chairs.Any questions or comments let me know.

This is actually my first review on anything but wow this chair has worked wonders. I recently started working from home, and the office chair I had was pretty uncomfortable so I decided to upgrade. This took like less than 10 minutes to assemble and I cannot believe how comfortable it is. It improved my focus and work ethic because I actually want to sit down in it and start work. I’m not a huge person, but the seat itself is pretty dang big, and the back is very high so honestly this is a great chair for all sizes.The only downside is it is creeky. I read this in another review and I ignored it and bought it anyway. When you lean back, it makes noise that’s pretty noticeable. It not an issue at all for me, but I can see how that might keep people from purchasing. I also replaced the wheels, and used my old ones because I’m on hard wood and the stock wheels move pretty easily so I wanted something more stationary.If you can deal with a little noise and you are looking for major comfort at a good price, I highly recommend this.

5'10 and 170 lbs - so most chairs work fine for me. That said, this is more comfortable than I was expecting with the mesh back, though my expectations were low. The bottom cushion is thick and after a few months seems to be holding up well enough (1-2 hours of use per day). The adjustable arms have about 1/8" play internally and will wobble about 2-3 degrees at any height setting. Perfectly acceptable to me at this price point. Assembly was easy and took me about 15 minutes at a work bench, but everything needed was included along with some spare parts in case the factory QC was lacking or you drop a screw that rolls off into Narnia. Aesthetics (white model) are why I bought this, and that will be up to each individual, but the final product looked the same as the pictures.Overall, I would recommend for the $150-180 range.

Now that I'm working from home for the foreseeable future, that little tiny desk chair from the college days was not cutting it. I researched chairs for weeks - which is really hard to do online. If there was a review for any chair I read it. I asked colleagues in professional facebook groups what they've bought now that we're all working from home. I initially bought this one from Staples (great sale plus Rakuten $), but they canceled my order. I couldn't fathom trying to pick out ANOTHER chair again, so I paid a little bit more to get the same one from Amazon. I AM SO GLAD I DID.I have a horrible tailbone. Sitting for long periods is painful. This chair has lots of tush support and between the seat and the back, puts you at a great position that the pressure is really off of the tailbone/coccyx. The seat is big and with the arms is plenty wide for real sized people. I'm 5'5" size 14 and my hips are comfortable and supported. The back supports me from the very bottom of my back/tailbone all the way up to above my shoulders. It's really been helping my posture and back/neck discomfort in the time I've had it.And the blue color is so great and fun - what a nice pop of color to come to work to each day in my home office.On a side note, when binging Space Force this weekend I screamed "OMG that's why my desk chair is so hard to find! They have a half dozen of them in the lab on Space Force!" So there ya go!I would absolutely buy this again. It went together so easily. The arms are a great height but also adjustable and plenty of cousin. The seat is firm yet supportive without being uncomfortable. And the back provides great support without the SUPER uncomfortable lombar cushions and bump outs that is found on so many other chairs.Even my husband loves it so much he's contemplating one for his new home office too.Four thumbs up in our household!

Good quality product. Nice Chair. definitely recommended.

The back support is superb. Just the right amount of pressure and just in the right place, at least for me (5'10"). The problem is the seat cushion. Like most chairs, it's too soft, and goes flat very quickly. Not uncomfortable to the point of feeling like sitting on hard wood, mind you, but still rather flat-feeling. I really don't understand why all office chairs are so terrible when it comes to the seat cushions. The only chair types I've ever had that didn't go flat were King-model DXRacer gaming chairs -- but their seat cushions are extremely firm and thick (so not very comfortable to begin with).

Its more comfortable than my previous "gaming" chair. I sit on it for 7-10 hours a day and it stays nice and comfortable, the back is surprisingly ergonomic and provides a pretty decent amount of support despite not being adjustable3 months later: Chair is still holding up great. No squeaking at all and still rolls smoothly

The chair is ergonomic and support is as described. It is worth the price, I have purchased the chair 2 weeks and so far the comfort of the chair has been fantastic. It is very easy to assemble !!!

Chair came in super fast, easy to assemble, light and solid. Only downside is that it is pretty stiff leaning back. Other than that great chair.

Chaise très confortable. Idéale pour de longue journée de travail devant son ordinateur. Ergonomique