HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

Q: has this been tested with POE hats or any other existing hats?

I originally installed a 3 relay contactor hat, but quickly grew out of that. I had to upgrade the power supply (Mean Well MDR-60-5) to 60 watts which powers the Pi (bypassing the micro USB port), 16 relay contactors (not all used), 8 sensors, and 4 3.3v step down regulators. The Pi is not a very good power source, especially 3.3v. All the gear is mounted on C45 DIN rails to avoid breadboards. All wire junctions are screw down like the this hat. Also the LEDs were very helpful in debugging. The code and it's relationship to the GPIO is quite complex. Latency and hysteresis were an ongoing challenge. I wouldn't cover the LEDs with another hat.

Q: According to diagram, the posts appear to be one way (diode) from the gpio head. can i send signal back to the pi from this breakout?

The diode is a led. Set the GPIO pin of your choice to output and the led will show the state of the output of that GPIO pin. Set the GPIO pin of your choice to input and the led will show the state of whatever is input to that GPIO pin.

Q: What are the length and width of the connector that fits onto the 40-pin header? I want to see if it will fit through the slot in the top of my case.

This is not the answer I was looking for. I would like to see if I can use this breakout box with the cover installed on my Raspberry Pi case. It has a slot 55 mm long X 8 mm wide. Will the header connector fit through this slot?

Q: Will it work with Pi Zero W?

Yes, the item can support Pi Zero W, But only two screw holes can be fixed.

4.7/5

Идентификатор продукта: 324523323

Безопасная транзакция

Подробности

Item pitch
3.5
Connector type
Screw
Number of contacts
40
Mounting type
PCB Mount
Material
Copper

💡LED Status Display

🔌5V/3.3V Indication

⚙️Terminal Block Compatibility

Часто покупаются вместе

HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

Raspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth (4GB)

Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED

Описание

🔧 Elevate Your Raspberry Pi Experience!

📦 COMPLETE ASSEMBLY - Comes fully assembled with all necessary components for immediate use.
💡 LOW POWER CONSUMPTION - Each LED operates at just 0.1mA, ensuring no interference with GPIO operations.
🔍 INSTANT GPIO MONITORING - Quickly observe GPIO logic levels with intuitive LED indicators.
🔧 VERSATILE TERMINAL BLOCK - Supports wire sizes from 26AWG to 16AWG for flexible connectivity.
🔗 SEAMLESS RASPBERRY PI INTEGRATION - Perfectly aligns with Raspberry Pi's 2x20 pin connector for hassle-free setup.

The HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT is a fully assembled module designed for Raspberry Pi models A+, 3A+, B+, 2B, 3B, 3B+, and 4B. It features intuitive LED indicators for GPIO status, a versatile terminal block for various wire sizes, and a low power consumption design, making it an essential tool for any Raspberry Pi enthusiast.