SOYOND 12 Volt Fuse Block, 6 Way Marine Fuse Block with Led Indicator Damp-proof Cover 6 Circuits Fuse Box With Negative Bus Fuse Panel For Car Boat RV Truck Dc 12/24v

👍🏻

Blown fuse LED design is rudimentary but will work well enough.Nice that it comes with Labels and fuses.

Like the title says, hopefully, you through this before you buy this block; I have a few things to share and this is coming from a person that works in the world of DC Bused Electrical systems all day, every day.1. As others may have pointed out, there is a leak in the block because of the LED indicators. Even with the fuse pulled, you will still get power at the terminal (at least with the block that I've received; they may or may not fix it in the future). DO NOT assume that power has been cut because the fuse has been pulled, you may end up with a nasty shock.1a. This can be fixed if you want to save a couple of dollars over the likes of Littelfuse or Bussman. Personally, my opinion is to open the back, temporarily remove the positive bus and completely remove the circuit board housing the LEDs and the 22 AWG wires jumping the PCB to the terminals.1b. If you're not very electrically savvy or you don't wish to take the time to modify the block; move on to something else and don't waste your time here. Technically, you could still buy this and run it unmodified, but I wouldn't suggest it.2. If you are in the 'modifying' mood, take the time to properly secure the positive and negative bus lugs. They didn't bother using thread locker or lock washers on these (in regards to securing the lug to the bus) and you will find yourself eventually fighting a spinning bolt in the future.3. The listing says that the block is rated for 100A max and 30A max per circuit, but I'm not sure that I would rate it that high. The bus is approximately 0.100" thick and of unknown quality (as far as the copper is concerned). I would say that 75A max is a little on the safer side...better safer than staring at a blob of molten plastic.4. As far as the fuses themselves are concerned, I haven't even bothered testing them...I just pitched them into the garbage. Don't cheap out on fuses/circuit breakers/etc. They're the most important part of the system, go with something reputable.5. Additionally; this should go without saying, but I can't stress it enough when it comes to fuse blocks, distribution blocks, etc. DON'T OVER-TORQUE THE SCREWS. The screws may be nickel-plated steel, but the bus is just plated copper...over-torquing the screws will strip out the terminals. Doesn't matter what brand you buy.Final notes:For what it is, at the cost that it is, it's not horrible. I'm saying 3 stars because it should have never left the manufacturer with the LED board as it is. A potential electrical hazard is something that should always be taken seriously and the fact that a company (regardless of where they are based) would allow this to go out the door without recall is disturbing. Does it do the job? Yes, but you have to do additional work to it in order to make it do that job in a safer manner. But at the end of the day, there is a reason why it is less than half of the price of Blue Sea Systems, Bussman, and Littlefuse.

Bought this to replace an old glass fuse box on my boat! This is perfect! I am impressed with the quality and the amount of features and stuff you get with this! I love the stickers and the blown fuse led feature! Just perfect! Price is also perfect!

It's ironic that the product image for this does not show labels yet I received a sheet of 80 labels, and fuses, and screws. Whereas the other circuit box from Blue Seas, costing nearly 4 times as much is shown with labels but they do not include them, or the fuses, or the screws. Wish I knew of this product earlier.

Seems super sturdy built with solid plastic I'll update my review if anything happens it's only been installed for a day so let's see how long it last